Featured Stories

Categories

Job Performance Report Updates | MachineMetrics

Eric Hagopian
February 10, 2017

 

6.png

 

We’ve made a few updates to our Job Performance Report!

First, we added the ability to search the jobs report by job name. As you type in the search bar, only jobs that match what you have typed will be displayed.

Also, we’ve added the ability to view an individual job report for all-time. To view an all-time individual job report, from the Jobs Report, type the name of the job whose report you want to see. When the name appears as a suggestion, click on it and you will be brought to that job’s all-time report.


Workcenter View

We’ve made some updates to our workcenter view including a couple of customizations. First, when rejecting parts displaying the “Remove from Good Parts” checkbox is now optional. If this checkbox is enabled, operators will have the option to remove any rejected parts from the good part count in addition to increasing the number of rejected parts. Additionally, the “Planned” checkbox when categorizing downtime from the workcenter view is also optional. If this checkbox is enabled, operators can classify a downtime as either planned or unplanned from the workcenter view. Both of these options can be found on the “System Settings Page” under the “Workcenter View” section.

We’ve also added the ability to categorize multiple periods of uncategorized downtime at once. From the downtime list in the workcenter view, click “Select Multiple”. This allows you to choose multiple downtime periods and categorize them like you would categorize any single period of downtime by clicking on “Categorize Multiple” at the bottom of the screen.


Parts

We’ve now added the ability for job cycle times to be entered as parts per hour. From the system settings page under the “Data Entry” section “Parts Per Hour” is now an option for the “Cycle Time Entry” field. When selected, you can input the expected and ideal number of parts (up to three decimal places) a job should produce over the course of an hour.

We have also added the ability to archive part rejection reasons. From the system settings page, select a reason and click the “Archive” button to archive the selected reason.


Job Runs

When looking at Job Runs, we’ve added the ability to specify a timeframe. This feature not only allows you to view historical job runs, but also future job runs by specifying dates in the future.


Downtime

One feature we have added is the ability to split a downtime period from the timeline view. Select a downtime and click on the “Split” button, set the reason for each downtime, adjust the start time for the second downtime and save changes.

Also, downtime categories can now be archived from the system settings page. Select a downtime category and click on the “Archive” button to archive the downtime category.


Warmup Programs

We’ve also added the ability to specify one or more warmup programs for each workcenter from the Workcenters page. To specify a list of warmup programs, click on a workcenter and find the “Warmup” field on the form. This field accepts a list of warmup program names, separated by a semicolon. Any time a warmup program is running on a workcenter, the workcenter will be considered inactive.


Optional Shifts

Finally, we have also added the ability to designate a shift as “optional”. When dispatching a job, optional shifts will be skipped. When dispatching a job during an optional shift, the job will run continuously (including during optional shifts) until it is stopped.

 

Learn More

Comments

Related posts

INDUSTRIAL IOT AND THE MOVE FROM PREVENTIVE TO PREDICTIVE MAINTENANCE
24Apr

INDUSTRIAL IOT AND THE MOVE FROM PREVENTIVE TO PREDICTIVE MAINTENANCE

One of the most important trends in the last few decades has been the movement toward lean manufacturing.  As companies began to review and change their operating procedures to eliminate waste, effici...

What is Industry 4.0?
17Apr

What is Industry 4.0?

  Known as the fourth industrial revolution since the 18th century, Industry 4.0 is an all-encompassing term to refer to the way computers, data and automation are evolving and coming together to chan...

Sensor Data vs PLC Data: Why Getting Deep Data Is the Right Way to Go!
09Apr

Sensor Data vs PLC Data: Why Getting Deep Data Is the Right Way to Go!

  When it comes to collecting data with industrial IoT within the world of manufacturing, it isn’t just about quantity. It’s also about the quality of the information that you are gathering from vario...

5 Myths- Manufacturing During Industry 4.0
02Apr

5 Myths- Manufacturing During Industry 4.0

The fourth industrial revolution is upon us, and as you may know, this means change. As an industry, it is imperative that manufacturers adopt new technologies and increased connectivity that will ena...

Improve Your Manufacturing Processes Using Data
27Mar

Improve Your Manufacturing Processes Using Data

Manufacturing, regardless of what tools, bits or parts the machines are producing, tends to follow decade old processes. There is an element of the 'this is how we’ve always done it and it’s worked fi...

IIoT and The Analytics Journey- MachineMetrics Presents at Hardwired NYC
20Mar

IIoT and The Analytics Journey- MachineMetrics Presents at Hardwired NYC

Bill Bither, Co-Founder and CEO of MachineMetrics, had the opportunity to speak at FirstMark’s Hardwired NYC event. In this visually stimulating presentation, he focuses on Industrial IoT- how it work...

How To Select The Right IoT Solution For Your Company
19Mar

How To Select The Right IoT Solution For Your Company

It’s always difficult for a company to choose a new software platform.  From concerns over learning curve to ROI to security to integration within an IT structure, most companies dread the process.  W...

SYNERGY RESOURCES ANNOUNCES PARTNERSHIP WITH MACHINEMETRICS
13Mar

SYNERGY RESOURCES ANNOUNCES PARTNERSHIP WITH MACHINEMETRICS

CENTRAL ISLIP, NY, March 14, 2019 – Synergy Resources, a provider of product and service solutions to the manufacturing industry, has strengthened its position in the Industry 4.0/Smart Manufacturing ...

Machine Monitoring: The Strategy to Achieve Expotential Efficiency Gains
01Mar

Machine Monitoring: The Strategy to Achieve Expotential Efficiency Gains

  Since the industrial revolution, manufacturers have been churning out goods which have bettered the livelihoods of billions of people. Machines have been fed raw material and transformed them into f...

Guest Blog: Industry 4.0 — Reinventing the Factory Stack by Robin Dechant
20Feb

Guest Blog: Industry 4.0 — Reinventing the Factory Stack by Robin Dechant

If you went to bed last night as an industrial company, you’re going to wake up today as a software and analytics company. Jeffrey Immelt, former CEO of General Electric, nails it down. Industrial com...