MES vs. IIoT Platform: Why Not Both?

Is an MES or IIoT Platform (or Both) the Best Option for You? The increasing use of industrial automation in process and discrete manufacturing facilities have put the manufacturing execution system
IIOT MachineMetrics MES / Jun 25, 2020

A Manufacturer's Guide to Edge Computing

Below is what we will cover in this in-depth article on edge computing in manufacturing. Select a link if you would like to jump to a particular section: An Introduction to Edge Computing in
MachineMetrics / Jun 17, 2020

A Long-Term Strategy for Manufacturers...

It’s not uncommon for a factory to operate several generations of the same type of production equipment within a single factory. Except for extremely large companies with very deep pockets, most
MachineMetrics Industry 4.0 / Jun 10, 2020
Start driving decisions with machine data.
Categories:

    A quick reference for lean manufacturing

    Here's your quick reference for lean manufacturing strategies. 

    The topics you should know about are the eight wastes of lean manufacturing, the lean manufacturing principles, and lean manufacturing tools and techniques. 

    This link has a great, concise description of each! Print it and keep it by your desk in case you ever need to brush up on lean manufacturing. 

    Recommended ReadThe Lean Manufacturing Cheat SheetSource: http://blog.kainexus.com

    Anything that does not add value in the eyes of the customer (waste) is minimized or eliminated from the value stream.Value Stream Mapping - Value Stream Mapping is used to visualize the flow of materials and information required to deliver a product or service to the customer.Read More

    Comments

    Leave a comment

    Subscribe to our mailing list

    Related posts

    Lean manufacturing crisis response

    Lean manufacturing crisis response

    Many states are opening manufacturing back up after limiting operations due to coronavirus response.  This process can be difficult and confusing.  Where do you start? What do you prioritize? How do y...

    Lean Manufacturing / May 14, 2019
    How lean can work for your whole office

    How lean can work for your whole office

    Lean manufacturing techniques are not just good for the shop floor. There are a ton of benefits to utilizing them in the office, too! It's not always easy, but it's worth it. Difficulties switching to...

    Lean Manufacturing / May 14, 2019
    Hoshin Kanri and Lean Manufacturing

    Hoshin Kanri and Lean Manufacturing

    Lean manufacturing principles trace back to Toyota. The lean technique has been proven to help businesses become more efficient and cut back on waste.  However, did you know that there is another stra...

    Lean Manufacturing / May 14, 2019
    Two ways you could be looking at lean manufacturing incorrectly

    Two ways you could be looking at lean manufacturing incorrectly

    What's next in lean manufacturing? How is lean manufacturing going to change with new technology? This is a tough question, mostly because lean manufacturing is a continuous process that incorporates ...

    Lean Manufacturing / May 14, 2019
    Lean is a versatile word

    Lean is a versatile word

    When you think "going lean," what comes to mind? Lean manufacturing? Lean wastes? Lean Startup? As it turns out, the word lean can refer to a lot of things.  Today we are going to discuss a few differ...

    Lean Manufacturing / May 14, 2019
    The basics of 5S in lean manufacturing

    The basics of 5S in lean manufacturing

    We know there are 8 wastes in lean manufacturing, but have you heard of 5S? The idea is that each worker in lean manufacturing production is in charge of systematically keeping their area clean, funct...

    Lean Manufacturing / May 14, 2019
    Two reasons why lean manufacturing is so effective

    Two reasons why lean manufacturing is so effective

    Lean manufacturing has stood the test of time as an effective way to increase efficiency in manufacturing.  Tech Target defines lean manufacturing as, "A methodology that focuses on minimizing waste w...

    Lean Manufacturing / May 14, 2019
    Lean manufacturing and standardized work

    Lean manufacturing and standardized work

    Have you heard of standardized work? It has to do with keeping the order in which tasks are done documented. Convergence Training said, "You can think of standardized work as defining who does the tas...

    Lean Manufacturing / May 14, 2019
    What is takt time and could your shop use it?

    What is takt time and could your shop use it?

    Have you ever heard of takt time?  The Fabricator said takt time is, " often described as the manufacturing rhythm and a key element in the adoption of a flow process. Takt time should match customer ...

    Lean Manufacturing / May 14, 2019
    Top reasons you should be utilizing lean manufacturing

    Top reasons you should be utilizing lean manufacturing

    Lean manfuacturing techniques can really help your business move forward.  Business Matters Magazine said, "With lean manufacturing, you only have the materials that you need and use. Because of this,...

    Lean Manufacturing / May 14, 2019
    Popular
    8 Wastes of Lean Manufacturing | MachineMetrics
    MachineMetrics / Jan 25, 2016
    OEE, OOE, and TEEP - What's the difference?
    MachineMetrics / May 17, 2017
    The Real Cost of Downtime in Manufacturing
    MachineMetrics / May 08, 2018
    Why Industry 4.0 is important
    Industry 4.0 / Jul 24, 2017
    Industry 4.0 advantages and disadvantages
    Industry 4.0 / Feb 24, 2018
    Categories

    see all