Start driving decisions with machine data.
Categories:

    Overprocessing is one of the seven wastes of lean manufacturing because it wastes time and resources. Plus, as Manufacturing Global said, "An offshoot problem from overprocessing is not just the use of extra ingredients, materials or parts and the extra employee hours spent, but it is also the increased wear and tear on the factory equipment." A hands on approach seems to be the best way to tackle this. Take a good look at your whole process and see if there is any waste! 

    Recommended ReadOverprocessing is often hidden in manufacturingSource: http://www.manufacturingglobal.com

    Spending time on the shop floor observing is more prudent than attempting to understand a problem from behind a laptop, as incidences of overprocessing can be hard to notice. Overprocessing is one of the seven wastes of lean manufacturing and arguably the most nuanced to spot when making a finished product. It is a question of adding value only when it is strictly needed, instead of completing a process out of habit. For this reason, it can be difficult for the organisation tasked with manufacturing a raw material to identify any possible actions that could be eliminated. Read More

    Comments

    Leave a comment

    Subscribe to our mailing list

    Related posts

    Lean manufacturing crisis response

    Lean manufacturing crisis response

    Many states are opening manufacturing back up after limiting operations due to coronavirus response.  This process can be difficult and confusing.  Where do you start? What do you prioritize? How do y...

    Lean Manufacturing
    How lean can work for your whole office

    How lean can work for your whole office

    Lean manufacturing techniques are not just good for the shop floor. There are a ton of benefits to utilizing them in the office, too! It's not always easy, but it's worth it. Difficulties switching to...

    Lean Manufacturing
    Hoshin Kanri and Lean Manufacturing

    Hoshin Kanri and Lean Manufacturing

    Lean manufacturing principles trace back to Toyota. The lean technique has been proven to help businesses become more efficient and cut back on waste.  However, did you know that there is another stra...

    Lean Manufacturing
    Two ways you could be looking at lean manufacturing incorrectly

    Two ways you could be looking at lean manufacturing incorrectly

    What's next in lean manufacturing? How is lean manufacturing going to change with new technology? This is a tough question, mostly because lean manufacturing is a continuous process that incorporates ...

    Lean Manufacturing
    Lean is a versatile word

    Lean is a versatile word

    When you think "going lean," what comes to mind? Lean manufacturing? Lean wastes? Lean Startup? As it turns out, the word lean can refer to a lot of things.  Today we are going to discuss a few differ...

    Lean Manufacturing
    The basics of 5S in lean manufacturing

    The basics of 5S in lean manufacturing

    We know there are 8 wastes in lean manufacturing, but have you heard of 5S? The idea is that each worker in lean manufacturing production is in charge of systematically keeping their area clean, funct...

    Lean Manufacturing
    Two reasons why lean manufacturing is so effective

    Two reasons why lean manufacturing is so effective

    Lean manufacturing has stood the test of time as an effective way to increase efficiency in manufacturing.  Tech Target defines lean manufacturing as, "A methodology that focuses on minimizing waste w...

    Lean Manufacturing
    Lean manufacturing and standardized work

    Lean manufacturing and standardized work

    Have you heard of standardized work? It has to do with keeping the order in which tasks are done documented. Convergence Training said, "You can think of standardized work as defining who does the tas...

    Lean Manufacturing
    What is takt time and could your shop use it?

    What is takt time and could your shop use it?

    Have you ever heard of takt time?  The Fabricator said takt time is, " often described as the manufacturing rhythm and a key element in the adoption of a flow process. Takt time should match customer ...

    Lean Manufacturing
    Top reasons you should be utilizing lean manufacturing

    Top reasons you should be utilizing lean manufacturing

    Lean manfuacturing techniques can really help your business move forward.  Business Matters Magazine said, "With lean manufacturing, you only have the materials that you need and use. Because of this,...

    Lean Manufacturing